Car Alarm & Security

Car Lockcraft Door Lock with 2 Keys Front Left Right for 1998-2009 PEUGEOT 206 Specification: Material: Metal Product Code: P-206-LR Fitting Position: 2/3 4/5 Door Front Left and Right Make-Model: Peugeot 206 All Models Note: 1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. 2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 3.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. 4.Instruction is not included.Professional Installation Is Highly Recommended. Package Included: 2 X Door Lock 2 X Keys

Car Lockcraft Door Lock 2 Keys for Ford Fiesta 1995-2002 KA 1996-2008 Courier Escort Specification: Material: Metal Manufacturer Part Number:96FGA22050CGPA Fit: Ford Fiesta MK 4 1995 - 2002 Ford Courier 1995 - 2001 Ford Ka 1996 - 2008 Note: 1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. 2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 3. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. 4. Instruction is not included.Professional Installation Is Highly Recommended. Package Included: 2 X Door Lock Cylinders 2 X Keys

EL-50448 Tire Pressure Monitor Sensor TPMS Activation Tool Description: 1. Use EL-50448 or equivalent tools to diagnose sensor function: Each sensor is equipped with a low frequency coil. When the tire pressure monitoring is used to enable mode, the low frequency transmission signal of the starting sensor is generated. In the read mode, the sensor responds to the low frequency start by transmitting the signal. In the tire pressure monitor read mode, when the body control module receives a read mode signal transmission, sensor identification code assigned to and read in order corresponding to the position of the vehicle. 2. Sensor function - the use of pressure increase / decrease method In a static mode, each sensor is sampled at a pressure measurement every 30 seconds. If the tire pressure is increased or reduced by more than 1.2 (LB / sq ft) compared with the previous measurement, it will be immediately re measured to confirm the pressure change value. If the pressure does change, the sensor is transmitted in a read mode. In the tire pressure monitor read mode, when the body control module receives a read mode signal transmission, sensor identification codes are allocated to the vehicle and read in order corresponding to the position. Feature: Type: Tire Pressure Reset instrument Detection System: Buick Model: EL-50448 Power supply voltage: GM models el50448 (V) Package Included: 1 X Tire Pressure Monitor Relearn Tool 1 X Battery 1 X Charger

Car Auto Steering Wheel Anti-theft Security Device Lock with 2 Keys Feature: 1. Lock tumbler are virtually pickproof. 2. Fit most steering wheels even steering wheels with air bags. 3. Heavy duty locking mechanism with unique cross-key designed. 4. Easily installs in seconds place it on the steering wheel and push button to lock. 5. Disables steering wheel system Locks onto your steering wheel making it impossible to turn. 6. Tough stainless steel construction, vinyl coated to protect interior and compact for easy storage. Specification: Material: Stainless Steel Color: Orange and Black Size: (L)X(W)X(H) 37X19X6cm/14.57"X7.48"X2.36"(appr.) How To Unlock: 1. Line up notch on key with notch on lock barrel. Insert key into lock and turn clockwise until push button pops open. 2. Pull latch open so it is free of steerin wheel. 3. Remove the product from steering whel,close latch and store. How To Lock: 1. Put vehicle in "park" set hand brake, turn off ignition and remove keys.You are now ready to install the product. 2. Unlock the product to open latch fully. 3. Hold the product handle horizontally away from the body over the adashboard of vehicle. 4. Rest hook onto steering wheel. 5. Push lock in to fully lock the product. Package Included: 1 X Steering Lock 2 X Keys

Feature: Model:LB-405 Name:keyless entry system 1.Remotely lock and unlock your car 2.Direction light flashing 3.LED indicator 4.Remote car location 5.Remote trunk release 6.Window Output (-) 7.Electronics and Penumatic door lock 8.Siren output 9.Universal for any cars Specification: Main unit: 1.Size: 8.6 x 6 x 2.5cm (L x W x H) 2.Voltage: 12V2V 3.Static Current: <15mA 4.Indicator current:20mA 5.Shock sensor current:<1mA Remote Control: 1.Size: 6 x 3.3 x 1cm (L x W x H) 2.Voltage: 12V 3.Current: 0mA 4.Battery:3-12V 5.Frequency:300-433.92MHz 6.Coding:Learning code 7.Code Time:>million Package Included: 1 X Control Box 2 X Remote Control 1 X LED Connection Wire 1 X Wire 1 X Operation Instruction

Feature: Model:LB-501 Name:keyless entry system 1.Remotely lock and unlock your car 2.Light flashing output 3.Remote car location 4.Negative trunk release output 5.Learning code 6.Siren output 7.Waterproof, moisture-proof, dust-proof 8.Connecting rod can be rotated 360 easy to install 9.Universal for any cars Specification: 1.Voltage: 12V 2.Thrust:3 kg 3.Action stroke:20mm Main unit: 1.Size: 77 x 6 x 2.5cm (L x W x H) 2.Static Current: <15mA 3.Indicator current:20mA 4.Shock sensor current:<1mA Remote Control 1.Size: 6 x 3.3 x 1cm (L x W x H) 2.Voltage: 12V 3.Current: 0mA 4.Battery:3-12V 5.Frequency:300-433.92MHz 6.Coding:Learning code 7.Code Time:>million Package Included: 1 X Main Unit 2 X Remote Control 4 X Motor 1 X Mounting Accessories 1 X Wire

Feature: 1. Suitable for all kinds of cars 2. Double remote controls, in case of losing or breaking 3. Remote car finding, LED indicator 4. Warning of abnormal situation 5. Trunk release function, easy to open your trunk 6. Detailed operation manual, easy to install and use 7. 4 buttons on the remote control, lock, unlock, programmable button, open car boot 8. Sign horn: DC 12V, 15W, single-tone 9. Two stages siren verification 10. Electronics and Penumatic door lock Specification: 1. Model:LB100D 2. Type: Anti-Theft Device One-Way,Portable 3. Alarming range: 100m 4. Metal holder, can be mounted tightly 5. Frequency range: 433.92MHz 6. Power voltage: 15V 7. Alarming response time: 0.01s 8. Alarm triggered: Shake 9. Vibrator: Built-in 10. Remote Controlled: Yes Package Included: 1 X Main Control Unit 1 X Siren Horn 1 X Vibrator 2 X Remote Control 1 X LED Connection Wire 1 X Emergency Switch 1 X Relay 1 X 3p Cable 1 X Compressing Switch 1 X English User Manual

Feature: Model: LB-402 1.Remotely lock and unlock your car 2.Direction light flashing 3.Remote car location 4.Remote trunk release 5.Window Output (-) 6.Electronics and Penumatic door lock 7.Universal for any cars Specification: Main unit: 1.Size: 8.5 x 6.3 x 2.8cm (L x W x H) 2.Voltage: 12V2V 3.Static Current: <15mA 4.Indicator current: 20mA 5.Shock sensor current: <1mA Remote Control 1.Size: 6 x 3.3 x 1cm (L x W x H) 2.Voltage: 12V 3.Current: 0mA 4.Battery: 3-12V 5.Frequency: 300-433.92MHz 6.Coding: Learning code 7.Code Time: >million Package Included: 1 X LB-402 Car Door Security Anti-Theft System 2 X Remote Control 1 X Wire 1 X Operation Instruction

Feature: 1. Suitable for all kinds of cars 2. Double remote controls, in case of losing or breaking 3. Remote car finding, LED indicator 4. Warning of abnormal situation 5. Trunk release function, easy to open your trunk 6. Detailed operation manual, easy to install and use 7. 4 buttons on the remote control, lock, unlock, programmable button, open car boot 8. Sign horn: DC 12V, 15W, single-tone 9. Two stages siren verification 10. Electronics and Penumatic door lock Specification: 1. Model: L202 2. Main Unit Size: about 6 x 6.5 x 2.5 cm 3. Remote Controlled: Yes 4. Type: Anti-Theft Device One-Way,Portable 5. Alarming range: 100m 6. Metal holder, can be mounted tightly 7. Frequency range: 433.92MHz 8. Power voltage: 15V 9. Alarming response time: 0.01s 10. Alarm triggered: Shake 11. Vibrator: Built-in Package Included: 1 X L202 Car Alarm System 1 X Siren Horn 1 X Vibrator 2 X Remote Control 1 X LED Connection Wire 1 X Emergency Switch 1 X Relay 1 X 3P Cable 1 X Compressing Switch 1 X English User Manual

Description: The product displays driving datas on the front windshield, such as speed, on the car front window glass, avoiding drivers unsafety because of watching the instrument while driving. Drivers can read the driving information instantly, and can always keep the best state on the way with HUD. 5.8-inch HD display screen. Combine OBD & GPS HUD system into one, free switch. Freely switch between OBD and GPS modes. The use of nano-technology to eliminate unwanted reflections and can make display information more clear. Display rich content: speed, engine speed, water temperature, battery voltage, low voltage alarm, high temperature alarm, speed alarm, free switching between kilometer and mile. Automatic and manual brightness adjustment mode, bright in day time and not dazzling in night time. Notice: 1.Open the engine hood and find the paster below it (see the picture below) if it has words like OBD II CERTIFIED, then it can be installed. You should affix the paster in the HUD display area, it can refrain strong light, brings better display effects when HUD working. 2. Know the type of your vehicle. When purchasing HUD, you need to choose the type of vehicle that meets the OBD II standards for normal use. Any US Vehicle 2004 or later will have an OBD2 port to use with the display. Outside the United States vehicle after 2008 will have an OBD2 port to use with the display. Specification: Screen: 5.8 inch Working Voltage: DC9-16V (DC12V 400mA) Environment Temperature: -40 degree centigrade ~ +80 degree centigrade Atmospheric Pressure: 86-106KPa Relative Humidity: 10%-95% Environmental Noise: 60dB(A) Alarm Sound Level: 60dB(A) HUD Size: 135 x 80 x 15mm HUD Weight: 110g Package Included: 1 X S7 HUD Displayer 1 X OBD Cable 1 X Manual 1 X Protective Film 1 X Mat

Description: 1.This product is for drivers' safety,at high speeds,especially in high-speed driving at night, in order to avoid the driver to look down their head to watch the instrument,and decrease car accident. 2.The HUD can display driving datas on the front windshield such as speed on the car front window glass; avoiding drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly and can always keep the best state on the way with HUD. Feature: 1.Available for any car, easy to install, plug and play 2.3.5" screen HD display.Multi-color design makes the screen more abundant and easier to read 3.Nano-technology to eliminate double reflections,more clear.Automatic and manual brightness adjustment mode,driving without glare. 4.Rich Contents: speed,compass,single driving time and distance, local time,satellite number, altitude, speed alarm,free switch between km and miles 5.Auto power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery; retaining the manual switch mode,more easy to control HUD. Specification: Screen 3.5 inches Working Voltage DC8-18-24V Working Current 40mA Sleep Current 15mA Speed Range 0-400KM Electronic Compass Accuracy 1 degree Clock Accuracy Satellite atomic clock Protection Circuit Reverse voltage, Surge protection 12V Car Charger 1000mA HUD Size 90 x 54 x 12mm Package Included: 1 X Head Up Display 1 X OBD Cable 1 X Reflection Film 1 X Mat 1 X English User Manual

Feature: 1. TOYOTA automotive products and equipment. 2. Fully automatic switching device to make your life more secure. 3. Simple installation. Specification: Material PC Voltage DC 12V Car Make Specialized for Speed lock device for original Toyota Type Car speed lock Appliance TOYOTA Package Included: 1 X Car OBD Door Lock

Feature: 1.Fits for Any Car with OBD2/EUOBD Interface, Plug and Play 2.5.8inch HD Multi-color LED Display Screen, with Nano-technology to eliminate double reflections, more clear 3.Detect and clear the fault code 4.Display information: free Speed Switch between MPH and KM/h, RPM, water temperature, instantaneous fuel consumption, average fuel consumption of 100KM, mileage, single driving time, Speed alarm, high water temperature alarm, RPM alarm, low voltage alarm, fatigue alarm, shift reminding 5.Automatic and manual brightness adjustment mode, bright in day time and not dazzling in night time. 6.Automatic power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery, retaining the manual switch mode, more easy to control HUD 7.Use Seamless technology and high temperature resistant fireproof material Package Included: 1 X E350 Car HUD 1 X OBD Cable 1 X Reflecting Film 1 X Anti-slip Pad 1 X English User Manual Specification: Screen 5.8 inches Working Voltage DC9-16V (DC12V 400mA) Environment Temperature -40 ~ +80 Atmospheric Pressure 86-106KPa Relative Humidity 10%-95% Environmental Noise 60dB(A) Alarm Sound Level 30dB(A) HUD Size 136*80*15mm

Feature: Remote operation: Long press the lock button for 5 seconds, start the vehicle remote control, but also remote flameout Introduction to Startup Keys Material: Use conductive adhesive Maximum outside diameter: 40mm Button Thickness: Internal lighting: blue, red and yellow 4 conductive contacts, do not use the current old mechanical key switch, the use of the effective number of 30 million times, without replacement Installation method 1: directly remove the lock and use the buckle of the installation Installation method 2: Remove the button behind the iron, using the paste installation method Remote start function: 1. To ACC, ON file first power supply, and then start the car 2. Long press 5 seconds to start the remote control button 3. Remote start detection handbrake, do not pull the hand brake remote start is invalid, 4. 10 minutes after the start of remote control without operation is automatically turn off, the brake on the car to stop the flame function is canceled Sensing mode switching function: Method: 1. Open the ACC bar first 2. At the same time press the remote control unlock key and lock key 1 seconds after release 3. Horn sound that open the induction function Emergency car function When the induction remote control is lost or damaged, then want to use the car according to the following methods: Use the spare key to open the door, find the host open and long press The host code on the switch for 5 seconds, then the speaker chirp 3, it means that anti-theft lock function will be lifted, the vehicle can use Remote start automatically locks the door function After each remote start or close the remote start, the system will automatically lock the door to ensure vehicle safety Specification: Engine start stop:5cm Working Voltage:+12v+2V Working Current:6mA Remote control frequency:433MHZ Receive frequency:433MHZ Package Included: 1 X Car Engine Start Button 1 X Start Button 1 X Poutput Line 1 X 6P Output Cable 2 X Smart Rremote Control 2 X Antenna 1 X Manual

Description: 1.The Q7 Heads Up Display (H.U.D.) has been designed for drivers' safety, especially for high-speed driving at night. 2.The Q7 H.U.D helps keep the drivers eyes on the road and can decrease the chances of having a car accident. 3.The Q7 H.U.D. projects important information (such as speed) onto the windshield, it can help inexperienced drivers to control their speed and it can help prevent getting a speeding ticket. 4.More importantly, it enables the driver instantly read the information whilst keeping the drivers eyes on the road. 5.With an anti slip pad and a reflective film insures that you will be able to see the infomation at all times. Feature: 1. Works with all makes and models. Plug and Play. 2. 5.5" screen and high-definition display. 3. Multi-color design makes the screen easier to read. 4. The use of nano-technology to eliminate unwanted reflections and can make display information sharper. 5. Display rich content: speed, driving direction, driving time, driving distance, real time, number of satellite connections, altitude, speed alarm, free switching between km/h and mp/h. 6. Auto power on and off when the vehicle starts and shutsdown, effective protection of the car battery; while retaining the manual switch mode, easy to control. 7. Automatic and manual brightness adjustment so you can driving without glare. Package Included: 1 X HUD Displayer 1 X Charger 1 X Manual 1 X Protective Film 1 X Mat Specificaiton: Operating voltage DC8-18-24V Working Current 40mA Sleep Current 15mA Electronic Compass Accuracy 1 degree Speed Range 0-400KM Clock Accuracy Satellite atomic clock Protection Circuit Reverse voltage, Surge protection Host Volume 13cm * 7.7cm * 1.4m 12V Car Charger 1000mA USB data cable 1m Product Weight 115g

Fitment: For Toyota car remote central lock locking keyless entry system with remote controllers car vehicle alarm system. Note: 1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. 2.Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm) 3.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. 4.Instructions Included, but professional installation is recommended. Package Included: 1 X Keyless Entry System 2 X Remote Controllers (Not For LEXUS ) 2 X Wire 1 X User Manual Specification: Main Unit Color Black Overall size(approx.) 88mm/3.46"(L) x 62mm/2.43"(W) Cable length 51cm, 101.5cm Material Plastic Output current signal light:5A*2 siren 10A central lock 10A Coding Leaning code Voltage 122V Static current <15mA intermittently Shock sensor current <1mA Remote control Color Black Working Voltage 12V Working Current 0mA Battery 3-12V Frequency 300MHz-433.92MHz Coding Leaning code Code times >million Distance About 60-80 meters

Specification: Color As pictures show Placement on vehicle Left, Right, Front, Rear Quantity 1pc Frequency 315MHz Note: 1. Please check your vehicle model before you purchase. 2. Kit will need to be installed on to sensor, sensor will need to be relearned/programmed to your vehicle. Package Included: 1 X TPMS Tire Pressure Sensor

Feature: Easy to operate, easy to lock, without the need to use the key, directly to the lock on the steering wheel position, pull open to support the steering wheel will not loose. Attaches the steering wheel to the break or clutch pedal making the vehicle impossible to steer and/or stop. When the lock, with the key to open, the lock will be able to shrink back. The Anti-Theft Steering Wheel Lock installs in seconds, but provides lasting security. Senior car steering wheel lock, ensure the safety of the car. Made of sturdy tempered steel construction. Universal fit for cars, trucks, vans, and SUV. Specification: Material: Iron+ Rubber Color: Red+Black Weight: 780g Size: Length 52cm, extend to 71cm Lock/Clamp Type: Steering wheel Lock Package Included: 1 X Steering Wheel Lock 2 X Keys

Feature: 1.2D Vision reflection display make your view more comfortable, more real. 2.Ability to display a huge range of car statistics including: speed, engine rotational speed, water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, local time,single driving time, mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, fault code elimination, ability to change units e.g. Kilometre/mile. 3.Plug and Play connectivity with any OBDII or EUOBD capable vehicle. 4.Multi colour design makes the screen easier to read highlight important details for quick viewing, the use of nanotechnology to eliminate unwanted reflections making the information easier to read. 5.Auto power on and off with the vehicle, automatic and manual brightness adjustment mode. HUD installation procedure: 1.Ensure your vehicle is OBDII compatible or EUOBD. a. Check around the area under the steering wheel for an OBD plug b. Contact your vehicle manufacturer or search online c. Open the bonnet and look for a OBDII compatible sticker (this is NOT on all OBDII compatible cars, therefore isn't a deciding factor) 2.Locate the 16 pin diagnostic link. This is usually located in the area under the steering wheel. 3.Start vehicle's engine and ensure power switch is in the on position. 4.HUD will power on with engine a. If the HUD displays vehicle voltage, fuel consumption, speed and rotational speed the unit has installed correctly. b. Failing the above: Wait up to one minute for software to sync and confirm OBD cable is plugged in properly. Note: This HUD is just compatible with OBDII standards or EU OBD.Open the engine hood and find the sticker below it, if it has words like OBDII CERTIFIED, then it can be installed. Package Included: 1 X HUD 1 X ODB Data Line 1 X Reflection Film 1 X Anti-slip Pad 1 X English User Manual Specificaion: Screen 5.5 inches Working Voltage DC9-16V (DC12V 400mA) Environment Temperature -40 degree centigrade ~ +80 degree centigrade Atmospheric Pressure 86-106KPa Relative Humidity 10%-95% Environmental Noise 60dB(A) Alarm Sound Level 30dB(A) Size Approx. 13*7.5*1.5cm

Description: HUD short for Head Up Display.It displays driving datas on the front windshield such as speed, rpm, fuel consumption,water temperature,voltage;avoiding drivers become dangerous because of watching the instrument while driving.Drivers can read the driving information instantly,and can always keep the best state on the way with HUD. Feature: 1.Available for cars with OBD2 and EUOBD port(Car automatic diagnosis system) ,plug and play. 2.Screen 5.5 inch HD display. 3.Multi-color design makes the screen more abundant and easier to read. 4.Nano-technology to eliminate double reflections,more clear. 5.New function: Driving distance measurement. 6.Rich Contents: speed,rpm,water temperature,voltage,instantaneous fuel consumption,average fuel consumption,driving distance measurement, voltage, shift reminders,fatigue driving reminders,low voltage alarm,high water temperature alarm,over speed alarm, engine failure alarm, eliminate the fault code,freely switch between kilometers&miles. 7.Auto power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery;retaining the manual switch mode, more easy to control HUD. 8.Automatic and manual brightness adjustment mode,driving without glare. Package Included: 1 X HUD Body 1 X Non-Slip Mat 1 X HD Reflection Film 1 X OBD Cable 1 X Reflection Panel 1 X User Manual Specification: Environment Temperature -40c- + 80c Atmospheric Pressure 86-106KPa Relative Humidity 10% -95% Environmental Noise Less than 60dB (A) Alarm Sound Level 30dB (A) Working Voltage 9V ~ 16Vdc (12Vdc / 400mA) HUD Size 12.5*7.5*1.5(cm) HUD Weight 110g CPU Dual Core Display HUD display and reflection panel display Material ABS+PC

Feature: Facial scanning technology.non-contact, facial recognition infrared cameras that monitors human eyelid and retina status. Wanning. When the system senses driver distraction it will emit a different warning tone advising the driver to concentrate on driving and to pay attention to the road. Keep your safety.Use this device can keep your safety while you are driving. Note: 1.This device only applies to the car and the truck. 2.The driver can wear glasses,but not

Feature: 1.Automatic adaptation models, in line with OBDII or EUOBD models plug ready to use (car auto diagnostic system) 2.Normal display mode, high-speed display mode, automatic display mode can be chosen 3.Flexible alarm mode. speed single-stage and four alarm modes, more conductive to driving safety 4.Speed alarm, there is conducive to the timely shift to achieve the purpose of the saving the novice also has a special Significance 5.Flexible brightness adjustment Function: 1. Parameter value: show the value with the units of kilometers, miles and engine speed. 2. OBDII port: connect the car and HUD. 3. Fuel icon: flash when the fuel is not enough to drive 100km. 4. Engine failure: flash when vehicle's engine has problems. 5. Engine speed: show the state of engine speed. 6. Engine speed icon: indicate the parameter value of engine with units of 1000r. It will flash when engine speed is alarming. 7. Speed alarm: flash when speed exceeds the preset values. 8. Rest tips: flash when drive continuously for more than 4 hours with HUD starting. 9. Sound switch: light when voice alarm is opened. 10. Fuel consumption icon: show fuel consumption is calculating. 11. Fuel parameter value: show the consumption of fuel in recent driving. 12. Dial button: multi-function switch, you can dial to left or right, you can enter into setting mode by long press. And also has the ability to decrease or increase fuel. 13. Fuel consumption per hour: show oil mass consumption per hour in driving. 14. Light sensor: sense the external light intensity and adjust the HUD's brightness to adapt to environment automatically. 15. Fuel consumption per 100km: show the fuel consumption per 100km in driving. 16. Voltage, throttle valve, water temperature, ignition advance angle and acceleration per 100km: voltage shows the vehicle's voltage; throttle valve shows the size of itself; water temperature shows the temperature of vehicle cooling fluid; ignition advance angle shows the angle of twist in firing. 17. Seconds: show the unit of acceleration per 100km. 18. Parameter value: show parameter value of Voltage, throttle valve, water temperature, ignition advance angle and so on. Compatible: For OBDII Interface Connector of Euro, Asian,America car After 2003, Made in China after 2007 Package Included: 1 X Car HUD Head Up Display

Feature: 1.Heavy duty double cylinder air pump. 2.Powered from your 12V cigarette lighter socket. 3.Easy to read analogue pressure gauge with PSI or Bar pressure readings. 4.Allows inflation of many other inflatable leisure items using the 3pcs inflatable adapters. 5.The compressor exerts wide ranges of use, such as car, motorcycle and bicycle, balls, rubber boats, etc. 6.It is good for the emergency needs when you are on highway and countryside road or rush for office on the morning while the tyre low pressure. 7.Convenience to put it in trunk of car and not occupy any space. 8.The appropriate tyre pressure not only save gas but also ensure the safety of driving. Specification: Voltage DC 12V Power 150W Air Flow 35L/min Max. Pressure 150PSI Size Approx. 24.5x9.5x16cm/ 9.65x3.74x6.30" Note: 1. Limited to use within DC 12V 14A power supply, can not be used in 24V, 36V, 110V and 220V household appliances unless with a transformer. 2. Do not touch the pump's metal body when the pump is rotating to avoid burns. 3. Keep the inflating at your sight and attention. Please check the gauge for the pressure and not let the pressure too high. Package Included: 1 X Tyre Air Pump 3 X Inflatable Adapters 1 X Power Cord With Battery Clamps 1 X Carry Bag 1 X Coil Air Hose With Pressure Gauge 1 X User Manual

Feature: 90 Degree Rotation For doors 1 3/8" to 2" thick Garage door Lock T Handle Kit with 2 keys Specification: Material: Zinc diecast construction Color: Silver Dimensions Length: 145mm/5.7" Width: 100mm/3.9" Package Included: 1 X Door Lock T Handle 2 X Keys

USB Monitor & APP Installation: 1.Insert the USB monitor into the Android DVD navigation USB interface, green light on USB monitor flashes in the normal state. 2.Download the APP from the following link: http://obd.syt-sz.com/android.USBTPMS.apk 3.After scanning the QR code through the mobile phone, copy the APP to install on Android DVD navigation. Specification: Product Name:(Android TPMS)TPMS Tire Pressure Monitoring System Exterior Sensor For All Android GPS Car Dvd Model: 645612 Tire Pressure Monitor Size: 92x38mm Tire Pressure External Sensor Size: 24x18mm Material: PVC(Polyvinyl Chloride) Monitor Color: Black Rated working voltage: DC12V Static average operating current: 20mA transmission frequency: 433.92MHZ Transmission Power: <10dBm Working temperature range: -40 - +80 Temperature accuracy: 3 Pressure monitoring range: 0-4.5Bar(65 Psi) Pressure accuracy: 0.1Bar(1.5Psi) Language: English, Simplified Chinese, Traditional Chinese Pressure Unit: Bar, Psi, Kpa, Kg Temperature Unit: F Reset Defaults: Pressure Alarm Upper Limit(3.2Bar, 46Psi); Pressure Alarm Lower Limit(1.8Bar, 26Psi); Temperature Alarm Upper Limit(70). Package Included: 1 X Tire Pressure Monitor 4 X Tire Pressure External Sensors 1 X Wrench 2 X Cover-opening Wrench 5 X Hexagon Nuts 1 X English User Manual

Feature: HUD mobile navigation bracket exploits the hardened organic glass to prevent scratch and project navigation information onto the panel based on optical reflection theorem. When placed on the center console, drivers need not bow to see because it will not block sight. Thus drivers could pay more attention the road conditions nearby. In the meanwhile, the design avoids the drivers observing the distant road conditions, which makes the navigation information more visualized and thereby improves the driving safety. Specification: Body material ABS High temperature/ PMM vacuum coating Compatibility Support 6.5 inch screen mobile digital products HUD angle About 198 degree can be adjusted Fixed mode Anti slip mat/ 3M plastic optional Support model Adapt to a variety of models Method of installation: 1. The above parts should be installed to the main body by pressing as shown below 2. Cleaning the surface on which is to be placed. It is generally recommend to clean the surface with dipped cloth. Then waiting for surface dry. 3. Jointing the base into the adhesive surface and exerting proper pressure to make the bonding effective after drying. 4. Putting the phone on the stents antiskid mat and adjusting the organic glass board to appropriate angle according to individual visual angle. HUD Mobile Navigation Bracket can be placed on the center console and the best visual angle is 45. Also can be adjusted according to individual preference. Starting your car after opening the mobile navigation system and setting the proper route (now most of the navigation systems contain a reflection mode). Package Included: 1 X HUD 1 X Cleaning Cloth 1 X User Manual

Feature: 1. Plug and Play connectivity with any OBDII or EUOBD capable vehicle 2. Screen 3.5 inch HD display 3. Multi-color design makes the screen more abundant and easier to read 4. Nano-technology to eliminate double reflections,more clear 5. Rich Contents: speed,RPM,water temperature,voltage,low voltage alarm,high water temperature alarm,over speed alarm, fatigue driving alarm, freely switch between kilometers&miles 6. Auto power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery;retaining the manual switch mode, more easy to control HUD 7. 5-level brightness adjustment,automatic and manual brightness adjustment mode 8. Automatic and manual adjustment for high water temperature alarm 9. Automatic and manual adjustment for low voltage alarm 10. Automatic and manual adjustment for fatigue driving alarm Specification: Environment Temperature -40c- + 80c atmospheric pressure 86-106KPa Relative Humidity 10% -95% environmental noise <= 60dB (A) Alarm Sound Level "= 30dB (A) Working Voltage 9V ~ 16Vdc (12Vdc / 400mA) HUD Size 9*5.4*1.2(cm) HUD Weight 40 g Package Included: 1 X HUD Display

Description: 1.The product is developed for safe driving of automaticly. When an auto is at high speed, especially at night, if the driver lowers his head to audio display, he will not take effective measures in time when some emergencies appear suddenly. 2.At that critical time, Activesafety HUD reflects very exquisite care by projecting the important information of meters display on front windshield in auto moving, such as speed. Not only does it helps new driver of less experience to control the speed to avoid overspeed in some speed limit road section, but also it makes the driver read the data rapidly without transforming vision and keep the best watch state sobermindedly. 3.Activesafety HUD offers many functions that make you experience the speed as well as the pleasure of driving. Feature: 1.Automatic adaptation models, in line with OBDII or EUOBD models Plug Ready to use (car auto diagnostic system). 2.Vehicle speed, engine speed, water temperature (voltage / throttle position / ignition advance angle / 100 km Acceleration) fuel consumption, mileage, low fuel tips, rest tips, engine failure, 3.Displayed simultaneously. 4.Normal display mode, high-speed display mode, automatic display mode can be chosen. 5.Free switch. km miles freely switch, which greatly facilitates Inch. 6.Suitable size.5.5inch display area, more conducive to the data read. 7.Switcher, launch vehicle, lorry shutdown, effectively protect the car battery; while preserving the hand Switch machine way more beneficial to control the HUD. 8.Flexible alarm mode. speed single-stage and four alarm modes, more conductive to driving safety. 9.Speed alarm, there is conducive to the timely shift to achieve the purpose of the saving the novice also has a special Significance. 10.Flexible brightness adjustment. automatic and manual brightness adjustment mode, not dazzling. 11.SIZE: 14*85*147mm, 5.5 Inch Display. 12.Display color: white color, white+yellow color, yellow+blue color. Function Instruction: 1. Parameter value: show the value with the units of kilometers, miles and engine speed. 2. OBDII port: connect the car and HUD. 3. Fuel icon: flash when the fuel is not enough to drive 100km. 4. Engine failure: flash when vehicle's engine has problems. 5. Engine speed: show the state of engine speed. 6. Engine speed icon: indicate the parameter value of engine with units of 1000r. It will flash when engine speed is alarming. 7. Speed alarm: flash when speed exceeds the preset values. 8. Rest tips: flash when drive continuously for more than 4 hours with HUD starting. 9. Sound switch: light when voice alarm is opened. 10. Fuel consumption icon: show fuel consumption is calculating. 11. Fuel parameter value: show the consumption of fuel in recent driving. 12. Dial button: multi-function switch, you can dial to left or right, you can enter into setting mode by long press. And also has the ability to decrease or increase fuel. 13. Fuel consumption per hour: show oil mass consumption per hour in driving. 14. Light sensor: sense the external light intensity and adjust the HUD's brightness to adapt to environment automatically. 15. Fuel consumption per 100km: show the fuel consumption per 100km in driving. 16. Voltage, throttle valve, water temperature, ignition advance angle and acceleration per 100km: voltage shows the vehicle's voltage; throttle valve shows the size of itself; water temperature shows the temperature of vehicle cooling fluid; ignition advance angle shows the angle of twist in firing, it's also a mark of engine's efficiency. Acceleration per 100km shows performance of the vehicle's acceleration per 100km. 17. Seconds: show the unit of acceleration per 100km. 18. Parameter value: show parameter value of Voltage, throttle valve, water temperature, ignition advance angle and acceleration per 100km. 19. Mileage: light when the fuel only sustains 100km. 20. Reel per minute: show the unit of engine speed if you multiply the parameter value with 10. 21. Kilometer per hour: show the unit of speed. 22. Mile per hour: show the unit of speed. Package Included: 1 X Car HUD Head Up Display 1 X Transfer Cable 1 X Reflective Film 1 X Anti-slip Mat 1 X User Manual

Feature: 1. PKE (passive keyless entry) automatically lock or unlock the car when owner approach or left the car in 1-2 meters---PKE car owner identification 2. PKE on/off by remote control 3. Push button start 4. Remote engine start/stop 5. Remote lock/unlock 6. Remote trunk release 7. Central door lock automation 8. Auto re-arm 9. Emergency disarm 10. Brake light flashes to warn cars after to keep distance 11. Engine cut off automatically once owner not step on footbrake once remote started for 10 minutes 12. If you are not sure whether there is a chip in your remote control, please ask your car vendor or a professional staff Specification: Main unit system: Operation Voltage: DC12V 3V Static current: 15maA(except indicator, snetor) PKE emission current: 40mA Shock Sensor Current: 1mA Coding: Leaning code Frequency: 433.92MHZ 125HZ Package Included: 1 X Brain 1 X Siren 2 X Remote Control 1 X Push Button 2 X PKE Antenna 1 X Wire Harness 1 X 6P Ignition Harness 1 X English User Manual

GEYIREN M9 HUD Display Car OBD2 EUOBD Car Driving Data Display Speed RPM Fuel Consumption Feature: 1.Available for cars with OBD2 and EUOBD port(Car automatic diagnosis system) ,plug and play. 2. Screen 5.5 inch HD display. 3.Multi-color design makes the screen more abundant and easier to read. 4. Nano-technology to eliminate double reflections,more clear. 5. New function: Driving distance measurement. 6.Rich Contents: speed,rpm,water temperature, voltage, instantaneous fuel consumption, average fuel consumption,driving distance measurement, voltage, shift reminders,fatigue driving reminders,low voltage alarm,high water temperature alarm,over speed alarm, engine failure alarm, eliminate the fault code, freely switch between kilometers&miles. 7. Auto power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery; retaining the manual switch mode, more easy to control HUD. 8. Automatic and manual brightness adjustment mode, driving without glare. Specification: Environment temperature -40c- + 80c atmospheric pressure 86-106KPa Relative humidity 10% -95% environmental noise <= 60dB (A) Alarm sound level "= 30dB (A) Working voltage 9V ~ 16Vdc (12Vdc / 400mA) Size 12.5*7.5*1.5(cm) Weight 110 g Package Included: 1 X M9 HUD